- This topic is empty.
15th May 2008 at 03:44 #47618Md.Mafiul IslamGuest
Can anybody please give me the details operation difference between Minilink TN service manager6 to Minilink Craft
Mafi30th May 2008 at 10:11 #47619SULIMANGuest
HOW TO MAKE RBS2206 CONFIGRATION (3/3/3)USING OMT?
STEP BY STEP30th May 2008 at 21:53 #47620ravisharmaGuest
i want to knw the difference between dxu21 and dxu31? and function of CF27th June 2008 at 00:06 #47621jamilGuest
Hi could any one help me in RBS2116 about alarm and about battery disconact at the BBS (pfu)
and battery not charge and the OMT r34-9 configration 3 psu only
please my email is email@example.com July 2008 at 13:58 #47622emre igrekGuest
are you sure your idb created with 2116 ?
if u see 3 psu only you installed 2216.
have to check your idb.2nd July 2008 at 14:08 #47623emre igrekGuest
there is no way to conf 3×3 .you must use 3×4
wanna explanation ?2nd July 2008 at 14:16 #47624emre igrekGuest
do u mean service manager6 is “msm 6.0” ?
in msm u have limited conf. capabilities
freq., id, channel alarms, etc…
in craft you can configure modulation, routing, advanced tcp/ip network settings, etc…14th December 2008 at 11:07 #47625Esmaeil NajarGuest
HI SEND ME 888 CABLING IN RBS2216 PLEASE24th December 2008 at 12:05 #47626parsaGuest
How much power get from RBS 2116?29th December 2008 at 12:42 #47627fred sabiitiGuest
am your subcontract employee who met ericsson’s equipments many times so i wish your training concerning RBS2116/2216 CONFIGURATIONS2nd January 2009 at 09:33 #47628MuckyGuest
dxu21 is using in RBS 2X06.
dxu31 is using in RBS 2X16.
anyway CF means Common Function with the general function operational software loading to this equipment..so if CF is not OPER so the TRX can’t be operational.7th January 2009 at 14:08 #47629kofi ansahGuest
like to know more about the RBS 2116 installation and testing and about a full cell site.10th January 2009 at 14:00 #47630finnGuest
CF? I think its central funtions right?12th January 2009 at 07:52 #47631emre iğrekGuest
there is no way to create 888 conf. or i dont know how can it be.For learning cable list create idb than,right cilck to installation database box(in system section )>display> cable list.
u can find all rx jumps.14th January 2009 at 10:07 #47632Ratana dinhGuest
What is the paramet of RBS 2206?