Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RBS-2×02 with sTRU

  • This topic has 3 replies, 1 voice, and was last updated 17 years ago by Nayef Al Nayel.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #46660
    Todor Kolev
    Guest

    Hi all,
    I have a question regarding the use of sTRU in RBS-2×02. Do I need to replace the DXU-11 with DXU-21 if I am installing a sTRU but not using its EDGE capabilities (working as GMSK transceiver)? There is an Y-link connector on the sTRU, but in the hardware referace the Y-link is described as “for the EDGE upgrade”.

    #46661
    Geet Mukhra
    Guest

    Hi Todor,
    you will have to replace the DXU 11 with DXU 21 if u want to use Stru..in 2202.You can install stru without edge capablities also.

    #46662
    Todor Kolev
    Guest

    Thanks for the quick reply.

    #46663
    Nayef Al Nayel
    Guest

    Hi Todor & Geet:
    i try to use the STRU in 2202 without y_link but it doesn’t work normal till i connect the Y_link

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.