[SAROJ KUMAR SENAPATI]

what relation between Ec/No & Ec/Io?
what we will see in layer 3 message
while location update?

is RSCP is more or less similar to RX level of 2G,

[Aswadi]

Chip Energy divided by Noise Density,
Ec/No is the Received Signal Code Power (RSCP) divided by the Received Signal Strength Indicator (RSSI).

[Afzal wahab]

rscp is above -100 and HSDPA downloading not coming in that condition what parameter i have to check.

[santosh nayak]

Hi
Plz gv me dteails of
Data (Throughput per TBF , TBF Success Rate , Mutilslot assignment success rate )

[manwinder]

how scanner helps in the rf optimization

[Zulfiquar Ahmed]

Q)how scanner helps in the rf optimization
A) The max radio links that our mobile can support is 3. But using scanner we can scan more than 3 RL sets.
Usually Scanner is mainly useful to find out the pilot pollution.

[krish]

HI,

in bad ec/io condition if rscp is good than what will be rssi ?

i mean i want to understand whats corelation between rscp and rssi?

[Nyoman]

Can any one have idea about HSDAP codes, Codding Tech. used in 3g and Relation between CQI and HSDPA…
2.What is actual meaning of “Ec\Io -12 dbm ” ?
3. What is denotes this term “RSCP is -80 db )

[what is CPICH,RSCP]

please tell me about CPICH,RSCP

[Samdublin]

why I have got -120 value of CPICH?

[TAIEB]

please tell me about CPICH,RSCP,Ec/No & Ec/Io

[Zulfiquar Ahmed]

CPICH: Pilot channel
RSCP: recived Pilot channel power
Ec/Io: Pilot channel Quality.
Ec/No and Ec/Io both are almost same.. no big diffence..
RSSI=RSCP+EC/Io
Eb/Io=Ec/Io+processing gain

[vikas shetty]

Can somebody pls explain me the parameters like

1)HSDPA
2)HSUPA
3)RSCP
4)RSSI
5)Ec/Io
6)Ec/No

[Arch]

RSCP = Received signal code power it is a some of RSSI(Received signal strength) and Ec/No in dbm.

RSCP (dbm) = RSSI(dbm)+Ec/No(dbm).

Characteristics:
1. These quatities will be measured from primary CPICH.To evaluate receive signal condition.
2. RSSI and RSCP is measured for full frequency.
3. Ec/No is measured for a cell on that frequency.

[Malay Das]

In UMTS how much carrier frequency is alloted in Each sector of a NodeB??
Is it 5MHz or something else?
What is the Bandwidth of a Scrambling code?
Is it same like 200KHz carrier channel in GSM??

[Author]

Posts