- This topic has 158 replies, 1 voice, and was last updated 16 years, 10 months ago by
patrick.fr.
-
AuthorPosts
-
23rd February 2007 at 12:25 #42588
Geet Mukhra
GuestHi,
In Nokia Ultra Bts ,one alarm “TRX TEST FAILED” is coming which has not cleared even now all trx are working in that BTS.
I have given OMU reset to the BTS also but alarm is still coming.
Can any one help me to clear the alarm?????23rd February 2007 at 12:26 #42589Geet Mukhra
GuestHi
Can any one tell me how to clear “Beating BTS alarm” in NOKIA Ulta BTS??26th February 2007 at 14:57 #42590kumar
GuestCan any one tell me how can i checked sector handover when a site is working
26th February 2007 at 20:44 #42591Patrick
GuestGeet Mukhra – 23 Feb 2007
You can clear Beating BTS alarm with 2 solutions:
Cancel alarm
ZEOR:N°BCF:N° ALARM;
Or
Reset site
ZEFR:N°bcf;under the word BEATING, you have a number which correspond to your alarm beating.
Exemple:
Beating BTS alarm
7530=> You have beating of alarm 7530 tx output level decreased.
With ZEOH:date:hours:Bcf:; you see history of your site and all alarm which “beating”
Beating BTS alarm exist also with City talk.
26th February 2007 at 20:51 #42592patrick
GuestGeet Mukhra – 23 Feb 2007
TRX TEST FAILED
This problem appear only in commissioning? or when a site is working for a long time? or when you do TRX loop test with BTSmanager?
If commissioning = not important
If TRX loop test = look at message, TS is busy, …
If normal time = strange! Make a reset site ZEFR and wait 1hour, 1 day or more.
27th February 2007 at 12:13 #42593shabnam
Guestplease reply all the answer in this page that every body who visit the site can see
27th February 2007 at 13:46 #42594Geet Mukhra
GuestHi Patrik,
I was doin trx test and ts was busy but after that trx test was done succesfuly but alarm is showing in zeol.All trx are working but alarm is not goin.27th February 2007 at 15:19 #42595patrick
GuestGeet Mukhra – 27 Feb 2007
ZERO:N° Bcf; To see all TIME SLOT
check column
I LEV =>
0=OK
4=TRX HSOP STATE =>
WO = ok
BL = nokCH status=>
ID = IDLE
FR = user on line
GP = GPRSIf alarm come back after ZEFR, change TRX or BB2xx.
27th February 2007 at 15:27 #42596patrick
Guestshabnam – 27 Feb 2007
logically, new question, new post but here it is a hold-all (dustbin) and unfortunately much do not have their answer.
1st March 2007 at 01:43 #42597fe
GuestPatrick
What will I do if I see alarm ” BTS With no Transaction” what are its cause
1st March 2007 at 13:33 #42598P
Guestfe – 1 Mar 2007
** ALARM C75152A
(15919) 7738 BTS WITH NO TRANSACTIONS
031st March 2007 at 13:38 #42599patrick
Guestfe – 1 Mar 2007
** ALARM C75152A
(15919) 7738 BTS WITH NO TRANSACTIONS
03There is no trafic on your BTS(sector).
The main explanation, it is a lost site: desert, campaign, no inhabitant, road in the middle of nowhere, …
The alarm cancel alone.
If you have this alarm + another 7743 or 7745 = problem
4th March 2007 at 11:07 #42600Arvind S. Alane
Guesthi all i got one alarm while integrating one nokia BTS site i.e.BTS BUFFER OVER RUN HAPPENNED FROM THE BTS SITE, and after this alarm only 3 TRX each per sector (4+4+4) came in supervisory state can i get the reason please?
7th March 2007 at 18:38 #42601maunish
Guestwhat is the diffrence betn fxc rri and e1/t1 i think both remains in the same transmission unit to transfer e1’s
7th March 2007 at 20:21 #42602Jam
GuestDoes anybody knows how to divide traffic per utilized codec(AMR FR/HR 5.9, 6,7 etc.) in NOKIA? I have found formulas that only distinguish between EFR, AMR FR and HR.
-
AuthorPosts
- The forum ‘Telecom Design’ is closed to new topics and replies.