Generic selectors
Exact matches only
Search in title
Search in content

Confusion about T1

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #42071 Reply
    Minnie
    Guest

    Can somebody give me a manual or study material for :
    1) Cell Planning
    2) how to decide about what number of T1’s to be used for a site.
    3) I am really not sure how the T1 works with number of radio and channels. These things make be confused. So if someone can explain it for me, I will be really thankful.

    Thanks
    -Minnie

    #42072 Reply
    Diwaker
    Guest

    Hi Minnie,

    Email me your all ur quires on diwaker.sharma@flextronicssoftware.com

    I can help you about ANSI (T1) Treansmission standards and Radio timeslot Mapping etc.

    I would link to know your system vandor and ur network location.

    -Diwaker.

    #42073 Reply
    Garry !!
    Guest

    Hi Minnie,

    T1 consists of 24 channels (unlike its counterpart E1 which has 32 channels) each of 64K.

    Cell planning can be learnt from a book by William LEE. Though you can get variety of vendor planning manuals, make some freinds with your local mobile operator’s network design group. That would be greatly helpful.

    Number of T1s required depends on the site configration and the BSS vendor. On an average 1 T1 would be good for an average site..but again which is dependent on the calculations.

    Revert incase if you require more information.

    Best regards,

    Garry !!

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Reply #42073 in Confusion about T1
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">