[Ani]

@Cege

If you have the DIP number, say DIP=RBLT0, you can use rxmdp command to get the tg number. Then do rxtcp for the cells.

[Ani]

@Cege,

Specifically, do these set of commands:

ntcop:snt=snt;
stdep:dev=dev;!get dev with BUSY state for the next command!
rxmdp:moty=rxots,dev=dev;!get the tg num!
rxtcp:mo=rxotg-tg;

[TULIO]

Hi every body

I want to configurate a BTS with TG synchronization

I have two cabinets with two E1s each one, the configuration was made defining CLUSTERID and setting TFMODE to Mastar and Slave, but the Slave cabinet don’t has synchronism.

Please help me

[sajid]

what is the latest version of erricsson rbs which is in use

[sajid]

can i have a list of the codes which is use to identify the reasons for site down.

[Nur]

Hi Cege,You can give following command.
If DIP & TG is same of a BSC.
Then it easy to find out the cell name.
DIP>cell id >cell name
rxtcp:moty=rxotg; [for getting cell id]
rlmtp:cell=cellid,id=all;[for getting id & code value]
rlmbp:id=50,code=2,gs=0;[for getting cell name]

nur800736@yahoo.com

[NARESH]

LOGIC TO UNDERSTAND ERICSSON COMMAND
I AM NEW TO ERICSSON BTS AND BSC PL HELP ME FOR THE SAME
PL GIVE ME BASIC COMMAND WITH DESCRIPION

[finn]

TULIO – 4 Jun 2008
Hi every body

I want to configurate a BTS with TG synchronization

I have two cabinets with two E1s each one, the configuration was made defining CLUSTERID and setting TFMODE to Mastar and Slave, but the Slave cabinet don’t has synchronism.

Please help me

you’ll have to get the time delays.. depending on the length of the feeder cables and ESB cables from master to slave plus internal. as I remember you should have around 4500-5500 milliseconds.

have you got a manual? i can give you a formula..

[IMa]

please any help about tg synchronization the master cabinet work but the extension or slave cabinet doesnot work
it was not synchronized with the master cabinet “we do all possible reasons and change all parameter “

[ari]

Hello all,

Does anybody know about this alarm in BSC and how to fix it?!

Thank you

AP APNAME NODE NODENAME
1 APGBSC91C B APGBSC91B

GPS MAJOR ALARM

DEV
EXAL-1-13

[finn]

IMa – 26 Jul 2008

please any help about tg synchronization the master cabinet work but the extension or slave cabinet doesnot work
it was not synchronized with the master cabinet “we do all possible reasons and change all parameter ”

change cabinet.. hehe

[Md.Abul Kalam Azad Khan]

Difference between concentrated LAPD,Unconcentrated LAPD and their application .How many TRX (maximum ) can be configured in Con LAPD & unconc LAPD ?

[Dario Alfaro]

tengo una BTS con la siguiente falla.

RXOTS-29-4-7

site problemm
391545 ABIS PATH UNAVAIL

[abdou]

esque je peu avoir la définition de la RBS 2206 ericson et la définition de c’est diferontes parties. merci

[finn]

“Difference between concentrated LAPD,Unconcentrated LAPD and their application .How many TRX (maximum ) can be configured in Con LAPD & unconc LAPD ?”

LAPD CON= 10.5 TRX
LAPD UNCON= 15 TRX
MULTIPLEXED= forgot

please comment

[Author]

Posts