Generic selectors
Exact matches only
Search in title
Search in content

planning AXE Local Exchange!

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #40674 Reply
    peterholl2004
    Guest

    I would line to find the planning document contain: when we can expansion group switch, or upgrade APZ…
    can you help me!
    Thanks!

    #40675 Reply
    gurmon
    Guest

    Hi peter,

    i don`t understand your question fully. Can you re-state ? What exactly are you looking for ?

    I have planned many AXE switches, both Local & International so I`m sure could help if I undestood what you require

    #40676 Reply
    Scot
    Guest

    Hi Gurman,

    I would like to discuss with you abt how we can calculate BHCA in AXE System ?

    Rgds

    #40677 Reply
    Gurmon
    Guest

    Scot,

    What monitoring appliction have you for the AXE to measure CD-r records ?
    You need a measurement tool. There are many available off the shelf, or contact your switch vendor who should be able to point you in the right direction.

    Without your data I cannot calculate the BHCA in your particular network.

    #40678 Reply
    Scot
    Guest

    Leve this VENDORs guys alone.

    Pls tell me what are things to be taken in to account for BHCA Calculation…we have everything…I will get you the DATS as you require.

    Rgds

    #40679 Reply
    Gurmon
    Guest

    Calculating Busy Hour Call Attepmts is fairly straight forward, as all you need to take into account is the number of call attempts made during the busiest hour of the day. BHCA measurements for both voice and fax calls must be taken into consideration.

    So you need a measurement tool, which is counting the number of calls attempted through your AXE. The hour which has the highest figure is the value you seek.

    Hope this helps.

    Gurmon

    #40680 Reply
    Scot
    Guest

    Hi Gurman,

    We have group of routes to…

    PSTN
    BSC
    VAS
    VMS

    And internal routes like
    MODEM POOL
    PPS ANNOUNCEMENT LINK

    DO WE HAVE CONSIDER EVERYTHING…or just PSTN+BSC Routes

    Rgds

    #40681 Reply
    bretrad
    Guest

    Does anyone here have a manuals for MTD-KDR112 002, this one for SP subsystem..The exact model is TEAC-MT-1000_15 UD, i always get fault code 51,which is mtd faulty, when i test it using DISUI command, read error indicated..I dont hv reference for this model..pls anyone provide manuals for this one.

    thanks in advance.

    #40682 Reply
    peterholl
    Guest

    Hi all!
    I am a new member.
    I would like to know about the different between 12Khz/16Khz pulse and Reverse Polarity signal
    Thanks!

    #40683 Reply
    Nobby
    Guest

    Peter the diffrenece is about 4Khz

Viewing 10 posts - 1 through 10 (of 10 total)
Reply To: Reply #40678 in planning AXE Local Exchange!
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">