[Techie]

why we use in some cases vertical polarization & horizontal polarization

[Imran Sabir]

Hi everyone,
Can any body tell me,what is the effect oh HI-LO Voilation on the network while designing a Ring Topology?
Is it true that performance degradation in 26GHz band is more severe than 38GHz band,due to Rain?

[Imran Sabir]

Hi everyone,
Kindly give me the answer that,
Why RSL(Recieved Signal Level) is in dbm while Fade Margin is in db?

[Imran Sabir]

Hi Techie,
actually the selection of polarization depends upon the different prameters.
Vertical polarization is more effective against rain.
Vertically polarized waves are less effective to multipath fade in lower frequencies.
vertical polarized wave give us 30% more RSL as compared to the Horizontal polirized wave.
The reason for using both H & V polarizations is to get maximum use of frequency in th network with out interference.

Hopefully this will help you

[Pix]

Hi sabir,

A received level is the measurement of an absolute power, that corresponds to miliwatts for instance. So that’s dBm.

The fading margin is an attenuation, that is a relative difference in power. And that’s not an absolute power, that can’t be express in milliwatt. It is relative… So it’s dB. A certain power – 3dB, means the power (whatever value it actually was) is divided by 2.
-6 dB = power divided by 4
– 9 dB = divided by 6

[Imran Sabir]

thx Pix,

But my concern is that,
FM=Rx Sensitivity(dbm)- RSL(dbm)

if both RSL & Rx Sensitivity are in dbm,how FM is in db?

[Techie]

Hi Imran Sabir,

Thanks for your reply, i wanted to ask you one more thing that is there any distance limitation in using the H and V Polarizations in the frequency bands

[saadia]

hello everyone!
i want to know about path losses in GSM 1800.can anybody tell me what is the link balance?

[Ahmed]

why we use in some cases vertical polarization & horizontal polarization.pls answer me

[Winet]

patrick.fr – 4 Apr 2007

Could you explain me what you meant?
ODU HS = Hot Standby?
Link is made on Ericsson Mini Link TN equipment, I’m sure there is 1+0 option checked. How ODU can be HS in this case?

[nizar]

can anybody tell me which all countries use alcatel bts for installaTION………………………………………………

[Imran Sabbir]

Hi Winet,
to me it seems that your link is getting interference from some other source.Contact your Transmission Planner to verify if there is any interference on that link or not.

[Imran Sabir]

Hi Techie:
Is there any distance limitation in using the H and V Polarizations in the frequency bands?

Hop distance is not dependent on the polarization,rather it is frequency dependent. Anyhow at smaller frequncies,H polarized wave suffer more multipath fading than V polarized wave,while in upper frequency bands,H polarized waves suffer more Rain fading than the V polarized waves.

[Techie]

Can anyone tell me the RSL Levels for Frequency bands

[pix]

Hi Sabir,

sorry for the late reply.
by substracting two powers, you obtain a delta of power.
And a “delta” is an attenuation…

dBm – dBm = dB

that’s correct.

a dB is a difference (or “delta”) between two powers expressed in dBm. Maybe you should refer to wikipedia if you want a more mathematical approach of this…

[Author]

Posts