Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

MRTG Problem in AXT2400

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #29244
    Nahid
    Guest

    Dear All,
    I’m facing some problem in AXT2400 Quintum VOIP Gateway. When i run snmpwalk that time, its showing something like this:

    system.sysDescr.0 =
    system.sysObjectID.0 = OID: enterprises.6618.1.1.10
    system.sysUpTime.0 = Timeticks: (1042900) 2:53:49.00
    system.sysContact.0 = system.sysName.0 = AXT2400
    system.sysLocation.0 =
    system.sysServices.0 = 79
    interfaces.ifNumber.0 = 0
    ip.ipForwarding.0 = forwarding(1)
    ip.ipDefaultTTL.0 = 64
    ip.ipInReceives.0 = Counter32: 19939
    ip.ipInHdrErrors.0 = Counter32: 0
    ip.ipInAddrErrors.0 = Counter32: 17688
    ip.ipForwDatagrams.0 = Counter32: 0
    ip.ipInUnknownProtos.0 = Counter32: 23
    ip.ipInDiscards.0 = Counter32: 0
    ip.ipInDelivers.0 = Counter32: 2234
    ip.ipOutRequests.0 = Counter32: 2514
    ip.ipOutDiscards.0 = Counter32: 0
    ip.ipOutNoRoutes.0 = Counter32: 0
    ip.ipReasmTimeout.0 = 60
    ip.ipReasmReqds.0 = Counter32: 0
    ip.ipReasmOKs.0 = Counter32: 0
    ip.ipReasmFails.0 = Counter32: 0
    ip.ipFragOKs.0 = Counter32: 0
    ip.ipFragFails.0 = Counter32: 0
    ip.ipFragCreates.0 = Counter32: 0
    End of MIB

    But it should show me the Interface status, like ,
    interfaces.ifTable.ifEntry.ifIndex.1 = 1
    interfaces.ifTable.ifEntry.ifIndex.2 = 2
    interfaces.ifTable.ifEntry.ifDescr.1 = emac0
    interfaces.ifTable.ifEntry.ifDescr.2 = lo0
    interfaces.ifTable.ifEntry.ifType.1 = ethernetCsmacd(6)
    interfaces.ifTable.ifEntry.ifType.2 = softwareLoopback(24)

    I don’t want to use Windows based HP OpenView, Please help me to configure the snmp server for AXT2400.

    Thanking You
    Regards

    Nahid

Viewing 1 post (of 1 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.