Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AF 400_error

  • This topic has 4 replies, 1 voice, and was last updated 14 years ago by Config of TENOR AFG 400.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #31971
    smike
    Guest

    Hi Mike:

    the unit AF400 star only few sec and after disconnected from the network,.., and send this error form the CLI.

    LOG_WARNING, pppoe: Too many PADI try
    LOF_INFO: sent PADI
    LOG_INFO, pppoe: timeout expired
    LOF_INFO: sent PADI
    LOG_INFO, pppoe: timeout expired
    LOF_INFO: sent PADI
    LOG_INFO, pppoe: timeout expired
    LOF_INFO: sent PADI

    #31972
    MikeM to Smike
    Guest

    Smike,

    this sounds like a PPPOE error. Maybe it could not log on to the DSL provider. Try disabling PPPOE and connected unit to a DSL modem that will do the login to the network or to a plain hub.

    MikeM
    mike_voip@hotmail.com

    #31973
    smike
    Guest

    Thank you Mike

    I do that, but I thing the equipment or the box is block or is dead

    smike

    #31974
    Mikem to Smike
    Guest

    possible, but doubtful as it is very rare for the ethernet port to go bad on the quintum.

    MikeM
    mike_voip@hotmail.com

    #31975
    Config of TENOR AFG 400
    Guest

    I have 3 Quitum tenor AFG 400 with 4 FXS ports configured with public IPs at 3 diffrenet sites.

    Quintum 1 is at the HQ to be connected to a PABX so that all HQ staff can reach the remote sites

    Quintum 2 is at remote site connected to 4 telephones

    Quintum 3 is at remote site connected to 4 telephones

    I need configuration help to achieve the following:

    1. Site to Site Dialing: so that users at any of the 3 sites can call one another.

    2. Phone to phone (Extension) dialing within same location: so that user from one extension can reach other users on other extensions.

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.