Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

quintum axt2400

Viewing 15 posts - 1 through 15 (of 18 total)
  • Author
    Posts
  • #31903
    ronald
    Guest

    i have axt2400.. i got error message 31..

    90 percent of my calls got error message 31..

    how to fix this??

    pls help

    #31904
    saleem
    Guest

    Quintum AXT2400 easy Configuration Help

    #31905
    John to ronald
    Guest

    Hi Ronald,

    Good day to you,

    can you send me the scenario, call flow, much better the diagram.

    so i can give you advise.

    Best regards,
    John
    tech.john@hotmail.com

    #31906
    ronald
    Guest

    Hi John..

    im using AXT2400 as FXO..

    from switch to quintum gateway to gsm modem…

    thanks

    #31907
    muhammad usman
    Guest

    how to configure AXT 2400 with 24 tellular plz guide

    #31908
    MikeM to muhammad usman
    Guest

    Muhammad,

    If you are using quintum for termination, there is a guide for config on quintum’s web site to help for that. Just go there and search for termination.

    If you need further assistance, please contact me

    MikeM

    #31909
    muhammad usman
    Guest

    dear mikem how to contact you do u have any skype id so plz add me because i m too much confused i have mounted the quintum but how to configure it plz guide me my skype id is muhammad_usman25@skype.com

    #31910
    MikeM to muhammad usman
    Guest

    Muhammad,

    Sorry, but I do not use Skype. I can be reached through Microsoft Messenger – mike_voip@hotmail.com.

    I should be online in about 1 hour from now.

    #31911
    Muhammad usman
    Guest

    Dear mike,
    in yor region what is the time because in my country in early morining and i have to start the project at 2 pm in the after noon so waht would be yor availability

    #31912
    MikeM to Muhammad usman
    Guest

    Muhammad,

    Please contact me direct at my email mike_voip@hotmail.com

    thanks
    MikeM
    mike_voip@hotmail.com

    #31913
    shah
    Guest

    hi i need help on how to setup call from asterisk to tenor axm800 to gsm?

    any body that can do help on this ?

    #31914
    ali
    Guest

    my carrier complaints that volume or voice very low so please suggest in axt2400

    #31915
    MikeM to Ali
    Guest

    You can try raising the gains which are located in cassignaling line group.

    Mike
    mike_voip@hotmail.com

    #31916
    Gulfan
    Guest

    Hi
    I wanna Ask About AXT2400
    i m using this gw on H3232 ,when we change on SIP so there is shoing Unregestred SO i wanna ASK What is issue Plz Solving and guid thanks
    Gulfam

    #31917
    MikeM to Gulfan
    Guest

    Gulfan,

    this sounds like you have configured for a sip server, but for one reason or another, the quintum is not able to register to this sip server. Please check your config.

    Mike
    mike_voip@hotmail.com

Viewing 15 posts - 1 through 15 (of 18 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.