Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Config Manager Connection problem

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #31857
    DuaneD
    Guest

    I have been using Config manager 104.14 for about a year to my Tenor CMS 120 and Tenor DX2030. I recently changed my Network speed from 10mb to 100mb and left duplex to auto on my CMS. Since then I am unable to connect to either of my quintums. I don’t see how that makes a difference. But nothing else on my network has changed. Help please.

    Duane

    #31858
    mamun
    Guest

    Me too I am facing same problem, config manager replay to me (( Check IP address)), while I can connect by telnet to gateway.
    any comments??

    #31859
    Nekoie
    Guest

    Yeah
    I think this is a bug in Tenor Config Manager , or mismatch compatibility between tenor config manager and Tenor Firmware !
    Any body have some experiences to help us to solve this problem ?
    Thanks a lot

    #31860
    HAL
    Guest

    Hi,
    I’m appreciating the same issue, I can connect only if I reboot the DX2030.

    Thanks for help

    #31861
    MikeM to Hal
    Guest

    I have seen many issues with the config manager software like this. I never use it and only use telnet as it works 100%.

    MikeM
    mike_voip@hotmail.com

    #31862
    Apollo
    Guest

    Me too I am facing same problem, config manager replay to me (( Check IP address)), while I can connect by telnet to gateway.
    any comments??

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.