Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

quintum echo

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #31747
    armani
    Guest

    hi all;

    i’m asking if there is a parameter that can fix the echo problem in the Quintum

    best regards

    #31748
    MikeM to Armani
    Guest

    The only way that there would be echo in the quintum is if you have raised the gains (TX and RX) too high. This will cause echo and distortion. Check these settings.

    MikeM
    mike_voip@hotmail.com

    #31749
    armani
    Guest

    thank you Mike,

    i want to know if i configured an E1, i must do 30 simultanous calls, the problem is i get a strange message “circuit unvailable”, instead i’ve only 30 users that call, i’m asking how can i know if all E1 channels are used or not?

    #31750
    MikeM to Armani
    Guest

    you can use the command cmd calls to see what calls are active at that time.

    MikeM
    mike_voip@hotmail.com

    #31751
    echo Problem AXT2400
    Guest

    Hello,

    I am facing alot of echo on a quintum axt 2400. I tested all other fixed gsm modules on it and there is no echo, but when i link to the quintum and place call, i hear echo. could you please advice a solution?

    Thanks

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.