Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

How to detect if a line is connected

  • This topic has 4 replies, 1 voice, and was last updated 16 years ago by Asif.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #31708
    voipquestions
    Guest

    I have a quintum AXT2400, and I want to check remotely through telnet if there are lines connected to it or no for each port , with the CLI command. Please help.

    #31709
    Tom Howard
    Guest

    cmd linestat x

    where x is the line number, tells you the line voltage and current on that line.

    #31710
    voipquestions
    Guest

    what does it mean when i find a positive voltage 50V for example
    and what does it mean that there is a negative voltage
    like -47

    Many thanks in advance

    #31711
    Mikem to voipquestions
    Guest

    you can also use the

    debug test o x (where x is the line number) and

    debug test e (to end test).

    This will specificallly look for dial tone and is more intuitive.

    mikeM
    mike_voip@hotmail.com

    #31712
    Asif
    Guest

    Printing Status for Line 24
    Line Current = 0 mA
    Line Voltage = 48 V

    *** What does above line mean?

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.