Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Call are not passing

  • This topic has 7 replies, 1 voice, and was last updated 16 years ago by MikeM to Mauricio.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #31559
    Sumit
    Guest

    Hi,

    Could anybody tell me, what is the problem going on gateway? Calls are not passing. I am getting this error.

    sip[39/0]: osipcall:stackSendCallProc
    sent message to sip: msg=9; ua=1
    Routing requested for:
    Orig#=PhoneNumber 0 NPI=0(public) TON=0 Normalized#=PhoneNumber NPI=1(public) TON=1
    Incoming SRC: IP
    CallingParty: 1041277891804
    Route code= selected TG=0
    0 match(es) found:
    Route response [39]: result=0 cause=34.
    use the cause from previous attempt if one available
    CallInfo[39]: fail event. cause=34 le

    Regards,
    Sumit

    #31560
    MikeM to Sumit
    Guest

    there are no digits (destintion) in the incoming call for the quintum to route on. The quintum is a switch and requires destintion digits to route.

    MikeM
    mike_voip@hotmail.com

    #31561
    Taha
    Guest

    Plz Mike send me the configuration Manuals and other stuff about Quintum VOIP gateways.
    Thanks Regards
    Taha
    electronics.ssuet2003@yahoo.com

    #31562
    MikeM to Taha
    Guest

    Taha,

    all of this is available on quintum’s web site.

    mikeM
    mike_voip@hotmail.com

    #31563
    Sumit
    Guest

    Hi Mike,

    Is there any application to test quintum gw by sending voice traffic from local network?

    Regards,
    Sumit

    #31564
    MikeM to Sumit
    Guest

    Sumit,

    There are many soft phone programs out there that you can try. You would load this on a PC and then use it to make a call to the quintum.

    MikeM
    mike_voip@hotmail.com

    #31565
    Mauricio
    Guest

    0 match(es) found:
    Route response [39]: result=0 cause=34.

    Seems no free channels. Verify your trunk group is related to your HND

    sorry my english.

    #31566
    MikeM to Mauricio
    Guest

    Not sure if you are asking a question or stating a fact. Cause 34 is usually due to either no valid match in the config for an inc IP call or all the available channels are in use.

    MikeM
    mike_voip@hotmail.com

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.