Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Problem with tenor D3000 cause=34

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #31238
    Hery
    Guest

    Hello,
    Can someone help me please. I use tenor D3000 and it’s work nice but the problem is sometime with the same dest number 60% of calls I have error with cause=34.
    Thanks

    #31239
    MikeM to Hery
    Guest

    Usually, the cause 34 is seen because a destination number is sent that there is no match for in the tenor.

    You say that it is the same number, so if that is the case, are all the channels in use at that time?

    MikeM

    mike_voip@hotmail.com

    #31240
    Hery
    Guest

    Thanks for your reply.
    No just 14 or 15 channels are in use.

    #31241
    MikeM to Hery
    Guest

    Well, check to the incoming number from the log and make sure it is identical. Otherwise, it would require some troubleshooting.

    MikeM
    mike_voip@hotmail.com

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.