Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Forget password Quintum d3000

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #31051
    Sugyami
    Guest

    Hello

    any one help i lost my passwod of Quintum d3000

    #31052
    MikeM to Sugyami
    Guest

    Sugyami,

    You can reset the password by connecting a PC to the console port of the D3000 (using a standard serial cable), running hyperterminal (38400, none, 8, 1, no flow), power the tenor off, then back on and when you see the message to “hit enter within 3 seconds…”, hit enter and choose modify. Go through the boot menu and the last question will be to rest the unit to factory default. You will need to answer Yes to this. This will erase your entire configuration including the password, but will not erase the IP address, subnet or default gateway, so will still be able to access the unit from IP. Finish going through the menu and then when the unit comes back up, there will be no password set and you will need reconfigure the unit.

    Mike
    mike_voip@hotmail.com

    #31053
    Rishi
    Guest

    Thnx

    #31054
    Rishi
    Guest

    Thnx Mike

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.