Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Setting 2 A800 under dynamic IP DSL

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #31000
    Robert
    Guest

    Hi, I got an A800 setup that is already working under dynamic ip dsl but I want to add another A800 for 16 simultaneous calls. What will I do cause only one ip will be use?

    #31001
    MikeM to Robert
    Guest

    Robert,

    Not really much you can do with this. You would typically need to have a separate public IP for each unit. One thing is to purchase a call relay, put this behind your nat with the one public IP assigned to it, then have it “relay” the calls to the 2 A800’s on the private IP.

    #31002
    Wilson Boyrie
    Guest

    The other question is were you will have enough bandwith.
    DSL with dinamic I.P. services do not have tipically that much bandwith on the direction from the user to the NET.
    Yu will need around 256 kb of real bandwith on that direction, and that is hard to get on a normal DSL line.

    Wilson Boyrie.

    #31003
    Robert
    Guest

    Can a Cisco 2500 do that the call relay?…thnx

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.