[Sohail]

i need to know can some body help what command is used to test a call from A800 to anolg line or numbers.

Regards

[MikeM to Sohail]

Sohail,

You can use the test command to test the PSTN lines for dial tone and then dial a number, but you will not be able to talk or hear voice using this test.

The syntax for the test command is;

test o x (where x is the pstn line number). This will test to see if there is dialtone or not.

test d xxxxxxxx (where x is the digits to dial) will dial out the number you specify.

test e will end the testing.

[Sohail]

thanks mike for this help will same command work for AXT 800 quitum gateway

[Sohail]

Hi mike i am try to conect tenor configuration manager with AXT800 but unable to connect it give mesaages access denied.

regards

[MikeM to Sohail]

1. The command for 2nd generation is put a debug in front. Like ‘debug test o x’

2. Make sure that you have the correct conf manager version for the software version in your tenor.

[Author]

Posts