Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Gatekeeper/Border Element

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #30897
    Ahsan
    Guest

    Hello Every One,
    I am new to quintum configuration,i have tenor ax800 i dont know what ip to assign to gakekeeper/border element in configuration manager can anyone help plz i am waiting for response

    #30898
    MikeM to Ahsan
    Guest

    Ahsan,

    In 99% of configurations, you can leave these 2 fields set to nothing or 0.0.0.0

    Mike

    #30899
    Rusty
    Guest

    Mike,

    I have 2 tenors aft800, i need to use only one static ip, they are on the same LAN, is there any config possible for this using a private ip?

    #30900
    MikeM to Rusty
    Guest

    Rusty,

    If you are setting both units up on the same private network, but only have 1 public IP, then this will not work. You would need either;

    1. Another static public IP and a router that can map both public IPs to the correct private IP of each tenor

    or

    2. Purchase a Tenor call relay to install behind the NAT and this will be able to handle the one public IP and send the calls to the correct private IP.

    Mike
    mike_voip@hotmail.com

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.