Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

no dialtone detected

  • This topic has 17 replies, 1 voice, and was last updated 17 years ago by MikeM to Hasan Mahmud Riyad.
Viewing 3 posts - 16 through 18 (of 18 total)
1 2
  • Author
    Posts
  • 29th June 2006 at 19:31 #30832
    MikeM to Bert
    Guest

    Bert,

    If you are using ISDN signaling, then you can disable the caller id relay located in the isdnsg.

    Mike

    10th April 2007 at 14:09 #30833
    Hasan Mahmud Riyad
    Guest

    Hey all
    i found the following messege showing my GW. what is the meaning of this type of message. can anyone help me.??

    RPT:3:No Responce to Seizure:0:0:2:5:TUE APR 10 20:05:57 2007

    RPT:3:No Responce to Seizure:0:0:2:6:TUE APR 10 20:06:02 2007

    RPT:3:No Responce to Seizure:0:0:2:4:TUE APR 10 20:06:04 2007

    RPT:3:No Responce to Seizure:0:0:2:6:TUE APR 10 20:06:21 2007

    RPT:3:No Responce to Seizure:0:0:2:4:TUE APR 10 20:06:21 2007

    RPT:3:No Responce to Seizure:0:0:2:5:TUE APR 10 20:06:22 2007

    RPT:3:No Responce to Seizure:0:0:2:4:TUE APR 10 20:06:32 2007

    RPT:3:No Responce to Seizure:0:0:2:5:TUE APR 10 20:06:32 2007

    RPT:3:No Responce to Seizure:0:0:2:6:TUE APR 10 20:06:37 2007

    RPT:3:No Responce to Seizure:0:0:2:4:TUE APR 10 20:06:42 2007

    RPT:3:No Responce to Seizure:0:0:2:5:TUE APR 10 20:06:43 2007

    RPT:3:No Responce to Seizure:0:0:2:6:TUE APR 10 20:07:08 2007

    RPT:3:No Responce to Seizure:0:0:2:4:TUE APR 10 20:07:11 2007

    11th April 2007 at 02:17 #30834
    MikeM to Hasan Mahmud Riyad
    Guest

    This is an alarm anytime the quintum tries to go off-hook on one of the anlog fxo ports, but does not detect dailtone.

    Possible causes are either you do not have a line connected to the port or the line is bad or there may be vmail on the line. Check your lines associated with the alarm.

    MikeM
    mike_voip@hotmail.com

  • Author
    Posts
Viewing 3 posts - 16 through 18 (of 18 total)
1 2
  • The forum ‘Voice over IP’ is closed to new topics and replies.