Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

calls fail on AS5400 from Quintium A800

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #30783
    MrCool
    Guest

    My calls get fails on ma AS5400 from Quintium A800.

    #30784
    MikeM
    Guest

    Ok, your calls fail. There could be thousands of reasons why. Can you try to be a little more specific on what you are doing and how they are failing?

    #30785
    mrcool
    Guest

    well configured H323 on ma AS5400 and getting H323 calls from Quintium A800. calls recieving but after one ring it goes fail.

    Thank you for replying

    #30786
    MikeM
    Guest

    Again, this is not too much information. It could be a mismatch in the audio codec, or a problem with faststart. Without looking at the log of the tenor it would be difficult to say which it is.

    If you would like me to troubleshoot this for you, you can contact me at mike_voip@hotmail.com.

    Mike

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.