calls fail on AS5400 from Quintium A800 This topic has 3 replies, 1 voice, and was last updated 16 years, 6 months ago by MikeM. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts 11th March 2006 at 21:19 #30783 MrCoolGuest My calls get fails on ma AS5400 from Quintium A800. 12th March 2006 at 03:57 #30784 MikeMGuest Ok, your calls fail. There could be thousands of reasons why. Can you try to be a little more specific on what you are doing and how they are failing? 13th March 2006 at 09:03 #30785 mrcoolGuest well configured H323 on ma AS5400 and getting H323 calls from Quintium A800. calls recieving but after one ring it goes fail. Thank you for replying 13th March 2006 at 14:50 #30786 MikeMGuest Again, this is not too much information. It could be a mismatch in the audio codec, or a problem with faststart. Without looking at the log of the tenor it would be difficult to say which it is. If you would like me to troubleshoot this for you, you can contact me at firstname.lastname@example.org. Mike Author Posts Viewing 4 posts - 1 through 4 (of 4 total) The forum ‘Voice over IP’ is closed to new topics and replies.