Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Static Route to Static Route

  • This topic has 2 replies, 1 voice, and was last updated 18 years ago by Antonio.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #30770
    Antonio
    Guest

    Hello , i have a quintum Tenor CMS, i using him as GK ,until now i just receive in IPRG and send it to TCRG(E1) using Hopoff’s , my question is : Can i receive by IP and send again by Static Route without passing for TCRG.

    i dont make any king of gw registration in my GK

    Thanks in advance

    #30771
    MikeM to Antonio
    Guest

    Antonio,

    Last I knew, the CMS did not allow IP-to-IP routing directly, only through GK process. Quintum had talked about putting this feature in as they do have a separate unit, call relay, that does ip-to-ip routing, but I do not know if they have put this in the CMS yet.

    You could, however, use 2 T1 ports, connect them back-to-back, send an incoming IP call out T1-a and come back in on T1-b and then go back out IP, but this will give you double compression/decompression and could affect the quality of the call.

    #30772
    Antonio
    Guest

    Thanks MikeM

    you help was great

    if you need everycing from Lisbon, just tell

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.