Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

pstn -> pbx

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #30656
    Rey
    Guest

    Hello, can somebody help me configure my A800, i just want all incoming calls from my pstn(ports 1 to 8) to be routed to pbx port 1 only…. Thanks….

    #30657
    MikeM
    Guest

    Rey,

    If you want all 8 PSTN to go to PBX port 1, you do realize that if one call is active, then no other calls will go through.

    To do this you should create a 2nd pbx trunk group, move channels 2 through 8 to the new trunk group then make sure that passthru is set to Yes on both pstn 1 and pbx 1.

    If you need further help on configuration, you can contact me at mike_voip@hotmail.com

    Mike

    #30658
    Rey
    Guest

    It’s ok if an active call is still in progress, i just want to make sure that when a call went through to pstn it will be answered by answering machine…

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.