Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Setup Call on Quintum DX2030

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #30612
    vicky
    Guest

    I just wonder, how be possible making a call directly from the quintum box to far end. The Quintum Tenor AX800 has a build pstn port, at moment I’ve connected with 1E’l ISDN line. Please advice thanks.

    #30613
    MikeM
    Guest

    Vicky,

    Your question and the topic are some what confusing. I am assuming that you have the E1 ISDN line connected to the DX2030 and the AX800 since the AX will never work with an E1 line.

    As for making making calls, there really is no way in any of the tenors to make a call from one box to the other. You need to have a phone connected to the unit for the AX, and /or a line to the AX or DX and make a call from the phone/line to the Tenor then the Tenor will route the call (if it is setup correctly) to the other end.

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.