Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Help, Only LAN 100M LED is blinking

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 29th October 2005 at 19:16 #30339
    Micoreh
    Guest

    My AXG dose not work, only its LAN 100M LED is blinking 1 time per second & there is no masage in hyper terminal.What dose it mean????

    29th October 2005 at 22:52 #30340
    MikeM
    Guest

    Micoreh,

    What happens when you reboot the unit? Do you get any messages on hyperterminal? You are connected to the console port with the settings of 38400, none, 8, 1, no flow control?

    30th October 2005 at 09:27 #30341
    Micoreh
    Guest

    After rebooting only its LAN 100M LED is blinking 1 time per second & dos not give any masages on hyperterminal.all consol port settings is Ok.

    30th October 2005 at 15:08 #30342
    MikeM
    Guest

    Micoreh,

    Can you get or make an ethernet crossover cable and try connecting the Tenors lan port to your PC’s lan port?

    31st October 2005 at 14:00 #30343
    Oco
    Guest

    Try to press diag and reset. Any message from quintum on hyperterminal whan you do this?

    1st November 2005 at 19:38 #30344
    Micoreh
    Guest

    I have try all of them, connecting via cross cable, pressing diag and reset.I get no masage from hyperterminal. It seemes its hardware may be damaged.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.