Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

call relay to ax2400

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #30329
    Jerson
    Guest

    to all,

    Im trying to link the call relay to axt2400..

    but it come that arj error.. please need help..

    #30330
    MikeM
    Guest

    Jerson,

    There are 2 possible reasons without me actually seeing the log that I can think of.

    1. You are using the epad area to allow/bar Ip addresses and you have not put the other unit’s IP address in the allow, or you have not put its own Ip address in the allow.

    2. You did not create a sroute to the destination end or you did not configure the number to match on for routing correctly.

    Mike

    #30331
    Jerson
    Guest

    Thanks for the reply mike..
    Im trying to do it now..
    thanks for reply

    #30332
    Jerson
    Guest

    i dont know what is this.. anybody know this please let me know..

    [2,1] New State = 0
    ch |01/01| 2005/10/29|20:08:01:640 |CasManager: [2,0,2,1] Received message from cas: RelComp.
    ch |01/01| 2005/10/29|20:08:03:505 |upDateHeartbeat timer expired
    ch |01/01| 2005/10/29|20:11:03:505 |upDateHeartbeat timer expired
    ch |01/01| 2005/10/29|20:12:56:965 |h323mgr:GateKeeper Found
    ch |01/01| 2005/10/29|20:14:03:505 |upDateHeartbeat timer expired
    ch |01/01| 2005/10/29|20:17:03:505 |upDateHeartbeat timer expired
    ch |01/01| 2005/10/29|20:18:54:990 |h323mgr:GateKeeper Found
    ch |01/01| 2005/10/29|20:20:03:505 |upDateHeartbeat timer expired

    #30333
    MikeM
    Guest

    Jerson,

    Usually the heartbeat error is a ethernet error that does not cause problems. This is when the Quintum sends out a “heartbeat” message on the ethernet and is expecting the router/hub to reply. If it does not get a reply, you may get this message. It usually does not cause any problems with normal functions.

    #30334
    Jerson
    Guest

    Hi Mike,

    Thanks for additional knowledge..

    i appreciate..

    Thank you much..

    #30335
    ArDz
    Guest

    Hi how can i configure the channeling of quintum AX2400?
    someone can help me

    thx…

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.