[amb]

hi,
everybody.special thanks to Mike.i create new pbxtg in analog 800 but all the channels in new tg is disable.pls help me. how i use the channel to configue?

[MikeM]

Amb,

YOu need to go to the first trunk group that was created and disable the channel(s) that you want to move to the 2nd, using the command dis 1 x (where x is the channel number to disable). Then go to the new Tg and enable the channels by typeing ena 1 x (where x is the channel number).

If you need further assistance, you may email me direct at mike_voip@hotmail.com

[amb]

Thanx Mike,i am really greatful and i think you help me in future.and last of all i thank once again.

[Author]

Posts