Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

break down password of tenor A400 series

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #29889
    Bernabe
    Guest

    Hi.
    Somebody how had been working with VoIP tech of manufacturer Quintum, in specific the Gateway tenor A400 series.

    Well i have a problem, my company have 2 devices tenor A400, but i need to put them in operation. but well the general manager changed, they didn’t have documentation of configuration, I am tryed to reset but can’t enter, i Think it is posible to reset it by hardware, jumping it..

    well if you have a good idea please send me.

    br_desarrollo@intelcom.com.pe

    #29890
    Wilson Boyrie
    Guest

    Connect a serial cable to the console port.
    Setup a communications software to 38400 bps,8 bits,no parity.
    Verify that you could “talk” to the box by pressing “enter” several times.

    Whith the software running, reset power to the box.
    it wil display a message at one point saying something like “press enter to enter configuration”.

    By doing that, you will reset the box to factory default, erasing the configuration and password.

    You are now ready to start from scratch.

    Best regards..

    #29891
    Bernabe
    Guest

    all your tips which you recomend, I do but nothing, when I reset, there is a sound “track” and the led ir red,only can get into to the main windows, and press several times.

    sorry you know the architecture of tenor A400, I think maybe a part of this device is fail

    #29892
    dick
    Guest

    this is faulty device, sounds like.

    #29893
    Sanaullah
    Guest

    How to reset Tenor A400 user id and password?

    I have lost password

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.