Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Quintum A800 cables

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #29709
    JohnM
    Guest

    Hello again:

    Is it possible that my ring-tip cable lead from my telco is just reversed, that I cannot detect the dialtone on the A800 when I do the “test o X”

    Many thanks,

    John

    #29710
    MikeM
    Guest

    John,

    Typically, the polarity of the analog cable does not matter, at least in the US it usually does not matter.

    You can try a couple of things.

    1. Verify that you do not have voice mail on the analog lines so that they have a stutter dial tone. The Tenors cannot detect this.

    2. If this only happens on 1 or 2 analog ports, try swapping lines/ports around to verify if the ports have gone bad on the Tenor.

    3. If you are using a GSM unit, make sure that everything is properly grounded.

    Mike

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.