Generic selectors
Exact matches only
Search in title
Search in content

Quintum Configuration Manager

  • This topic is empty.
Viewing 10 posts - 16 through 25 (of 25 total)
  • Author
    Posts
  • #29601 Reply
    Rox
    Guest

    Dear All,
    I got problem when I’m trying to get into my Tenor AX.

    System Software P103-08-00 Oct 21 2005, 13:03:40

    Can anybody help me where to get the TCM ?

    Because I see it on the quintum.com it only provide Tenor Configuration Manager CM103-07-02.

    My Current Client Version is : TENOR_CLIENT_P102.11.00
    My System OS : Windows XP

    #29602 Reply
    MikeM to Rox
    Guest

    Rox,

    the version number for the TCM does not, and will not, be the same as the version number for the tenor software. The latest version of TCM on the web should work fine with the software version you have. You should always check any release notes.

    #29603 Reply
    anseie
    Guest

    Hi.
    I have a problem when I connect to TenorCMS(1G) by Tenor Configuration Manager.

    When push “Connect”, following messages are displayed
    in console of TenorCMS:

    0x2e37330 (webServer): Quintum DSI 0x300 exception: PC 0x0034e8d8 DAR 0x30342e31 DSISR 0x40000000

    NAME ENTRY TID PRI STATUS PC SP ERRNO DELAY
    ———- ———— ——– — ———- ——– ——– ——- —–
    webServer 52d00c 2e37330 205 READY 5bf7d0 2e36b68 46 0

    stack: base 0x2e37330 end 0x2e2d6f0 size 39312 high 4248 margin 35064

    options: 0x4
    VX_DEALLOC_STACK

    And TenorCMS will reboot automatically.

    Can anyone help me about this problem? thx

    #29604 Reply
    anseie
    Guest

    I’m using those versions.

    [Tenor Configuration Manager]
    Client Version : TENOR_CLIENT_CM104.14.00_0322306

    [TenorCMS]
    Database Version: DB_CMS_M04_A008_V1.3.14_100402
    Tenor CMS System Controller: v1.5.36

    #29605 Reply
    Ahmad
    Guest

    hi every body we want to know how softswitch can be use bu ys we want to use it can you help us
    thanks

    #29606 Reply
    rob
    Guest

    I can’t cofigure a quintum tenor as . please tell me the commands one after one to configure a tenoras gw . thanks….

    #29607 Reply
    Abedin
    Guest

    Hi All,
    Can anyone help me out in enabling Configuration Manager for Quintum Box, i can able to telnet but when i try using Conf. Mgr. it throw an error “Premature EOF Encountered (Please Check the IP Address)
    I use Win XP…….thanks in advance

    #29608 Reply
    MikeM to Abedin
    Guest

    Abedin,

    It is always helpful to include the model type of quintum that you are using.

    My first answer to you would be are you using a Gen 1 (A400/A800/D) or a Gen 2 (AS/AX/DX) unit.
    Config manager will not work on any gen 1 unit, only on gen 2.

    Also, you have to make sure that you have the correct version of config manager to match the software version running on the Quintum.

    MikeM

    #29609 Reply
    Beni
    Guest

    How to reboot my quintum tenor dx from my pc

    #29610 Reply
    MikeM to Beni
    Guest

    whether you are connected via LAN or console port, as long as you can access the unit you can reset as follows;
    1. connect to unit and enter username and password.
    2. type “main mc”
    3. type “reset”
    4. type “yes”

    This will make the unit perform a standard reset. If you want to set the unit to factory default, then;

    1. connect to the unit and enter username and password.
    2. type “conf mc”
    3. type “setfactory”
    4. type “yes”
    5. follow directions 2 – 4 above to reset the unit.

    MikeM
    mike_voip@hotmail.com

Viewing 10 posts - 16 through 25 (of 25 total)
Reply To: Reply #29593 in Quintum Configuration Manager
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">