Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

How to configure Elesign ESC-2420 (SIP)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #29434
    Facundo
    Guest

    Hello,

    We would appreciate if somebody help us to know the configuration of Elesign ESC-2420 Gateway (SIP Version) that will be connected to one extension of a traditional PBX.
    In the head quarters we have installed ESC-2420 (SIP Version) that is connected to one extension of our traditional PBX. As well the PBX has connected traditional telephone lines. In the branch office we have installed Elesign ESP-1202 IP telephone (SIP Version) that would have to be able to call to the extensions of the traditional PBX of our head quarters and as well to take line (traditional telephone line) of the same PBX. In addition this equipment would have to be able to receive calls from the traditional PBX.
    Summarized we have to configure both equipments to the ESP-1202 (SIP Version), that is installed in the branch office, acts like one remote extension of our PBX.
    At the moment we only can make calls from a traditional telephone connected to the VOIP1 of the ESC-2420 (SIP Version) to the ESP-1202 (SIP Version).

    Thanks in advance.

    Regards,
    Facundo Demian Gómez.

    #29435
    KOUA Koffi HUBERT
    Guest

    Good morning,
    please, i need a passord of Voip gateway ESC4820 to configure it

    #29436
    Mathieu
    Guest

    Support technique ou la methode de configuration du
    4-Port Gateway (ESC4820)

    #29437
    Leal Edimar
    Guest

    I have ESP1202 and a need:
    User…..
    Pass…..

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.