Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AX

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #29412
    betty
    Guest

    index Destination NetMask Gateway EIAttached Metric
    —– ————— ————— ————— ————- ——
    1 0.0.0.0 255.255.255.240 210.6.87.81 EI-SL1DV1EI1 1

    EthernetInterface-SL1DV1EI1# print

    EthernetInterface-SL1DV1EI1 :
    name : washington-c name
    PortNumber : 1 Read Only, Physical
    ManagementAccess : 1 Access Enabled; Defa
    DUPlex : 0 Auto
    IPAddress : 210.5.87.88
    WebServerPort : 8080 Port Number
    SubnetMask : 255.255.255.240
    ExternalNATIPAddr : 0.0.0.0
    DHCPEnabled : 1 Enabled
    PPPOEEnabled : 0 Disabled, default
    PPPOERedialInterval : 0 default
    PPPOEUserName : (Not Set) user defined
    PP

    is there any config that i missed, all i need is to see on internet my AXM

    #29413
    Wilson Boyrie
    Guest

    These are the settings from a working gateway,on a static I.P. address.

    What kind of service provider do you have???

    If you have DSL and need to login and enter the password , you will need to work on the PPOE section.

    You are set for a static I.P. address, but the DHCP is enabled. Seems to be something wrong with that.

    Quintum# config
    config# ei
    config-EthernetInterface-SL1DV1EI1# print

    EthernetInterface-SL1DV1EI1 :
    name :
    PortNumber : 1 Read Only, Physical
    ManagementAccess : 1 Access Enabled; Defa
    DUPlex : 0 Auto
    SPeed : 0 Auto 10/100 mbps; De
    IPAddress : 64.xxx.yyy.zzz
    WebServerPort : 8080 Port Number
    SubnetMask : 255.255.255.0
    ExternalNATIPAddr : 0.0.0.0
    DHCPEnabled : 0 Disabled, default
    PPPOEEnabled : 0 Disabled, default
    PPPOERedialInterval : 0
    PPPOEUserName : user defined
    PPPOEPassword : user defined
    InternalNATIPDirAttached :
    FilterIPDirAttached[1..16] :

    config-EthernetInterface-SL1DV1EI1#

    #29414
    KaKa
    Guest

    What could i see in ur config. is ur Quintum’s IP and your Gateway’s IP both are from different subnets.
    Check it!

    #29415
    betty
    Guest

    thanks for your reply it helps me a lot

    anyone had a complete CLI command of AXseries

    thanks,

    betty

    #29416
    jason
    Guest
    #29417
    jason
    Guest

    i have a ax, im trying to config it.. but then i got errors on doing it.. its like that i cant activate the channels say 1-24 im creating a channel group then after that you have to check a channel which you like to test on, and it give no channel to check, anybody could help me, do i need a command at cli to activate the 24 channels, maping not working..

    i just reset it in factory default but it gives me thesame..

    output..

    thanks

    #29418
    Wilson Boyrie
    Guest

    I could give you a hand setting up that AX.
    Get in touch via e-mail and we could setup a time to get online and do the setup

    It is a simple process, but all the steps need to be on the right order.

    Once you learn the steps, you will be able to take it apart and put it back online in about 45 minutes flat

    wboyrie@yahoo.com

    #29419
    betty
    Guest

    hi guys, are the AXseries can monitor the bandwidth or current call using MRTG is there anyone who knows?

    thanks,
    betty

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.