Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PRI erorr mssg

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #29174
    Mel
    Guest

    after the GW config this is what I get from the PRI,can someone please help me,
    q931 |01/01| 2005/03/04|16:18:25:775 [0] L3U_Proc[Cid:0x0]: ESTABLISH_WAIT(27) Ev=0x211 ch |01/01| 2005/03/04|16:18:25:775 PRI(2,0,1,0×0): received MANAGEMENT_IND from L3. ch |01/01| 2005/03/04|16:18:25:775 PRI(2,0,1,0×0): received HOST_DATA_LINK_DOWN.

    #29175
    nimi
    Guest

    is it a T1 or an E1?
    What kind of indication the PTT receive?

    #29176
    Mel
    Guest

    E1

    #29177
    nimi
    Guest

    it looks like the d-channel is down. What kind of indication the local PTT receive? How is your E1 port configured? (multi-framing, signalling and etc.)?
    it could be configuration mismatch, and it also possible that there is some kind of problem with the transmission – try to change an E1 port on the transmission equipment or to check the configuration on the transmission equipment regarding TS16 (some transmission equipment can manage TS16).
    good luck,
    Nimi

    #29178
    Mel
    Guest

    the PTT keeps telling us the pri is working fine and it is active…
    as for the E1 port config dont know for sure our tech did it,
    can I have your e-mail please?

    #29179
    nimi
    Guest

    Hi Mel,
    You can contact me with MSN messanger: nkapon@hotmail.com.

    My email address is nkapon@oasiservice.net

    Im going offline now, but will read your email in 12 hours time or so..
    Please let me know what kind of equipment are you using and what transmission equipment you are using as well..

    Good luck,
    Nimi

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.