- This topic is empty.
21st December 2006 at 18:51 #28894MikeM to InspireGuest
So if you want to add digits to your caller id, then there is the ani translation feature that I believe may do what you are asking. You can find information about this feature in the CLI reference guide. It should be under calleridxlatedirectory.
email@example.com January 2007 at 07:08 #28895SarojGuest
It is very easy to enable the web interface. Your friend must be just teasing you with the web. Just use following command.
Quintum >config sys
config sys# disablegui no
That’s it. Enjoy.
Saroj Shrestha2nd February 2007 at 17:08 #28896sanjeevGuest
can any one help me out i want to know all commands for atx2400 please help me out2nd February 2007 at 21:57 #28897MikeM to sanjeevGuest
You can find all the commands in the CLI reference guide available on Quintum’s web site under support.23rd February 2007 at 18:16 #28898alwakilGuest
i am new for config quintum ASSERIES 400 and AX 800 i know the config for origination. but i don’t know how config for (pstn) origination calling cards.pls help me , give me details how can i config for calling cards and how i add this with my softswitch (IVR & VOIPBOX) pls send me details. thanks23rd February 2007 at 22:05 #28899MikeM to alwakilGuest
There are many things to consider when you want to do this. Will you have your own radius to do the authentication part or will you send the calls to a switch that will handle the ivr/authentication (easiest to configure). In general, you do most of the config in the tcrg area, but again, it depends on the way you want this to work for you.
firstname.lastname@example.org March 2007 at 21:32 #28900mugoGuest
i have quintums A800 and AX models bt do not know how to connect to cdma22nd March 2007 at 12:26 #28901MikeM to MugoGuest
You make the connection from the PSTN/FXO ports to your CDMA and then, if using for trmnation, you would confg the quintum with hopoff/lampattern.
If you require more information on the exact configuration, please contact me directly at email@example.com
MikeM25th March 2007 at 19:07 #28902ShoyebGuest
The ivr response that “Technical difficulties” why ?26th March 2007 at 00:44 #28903MikeM to ShoyebGuest
could be for hundreds of reasons. Everything from you did not configure quintum correctly, to your radius server is not responding correctly to the messages being sent back by your radius are incorrect and about a dozen other reasons in between. No way to tell for sure without looking at log of the call and radius messages.
firstname.lastname@example.org March 2007 at 09:51 #28904Imran SardarGuest
I need to configure a DX2030 for a UK ISDN line to accept calls and forward them onto a SIP server in USA.
Can you help?28th March 2007 at 13:10 #28905MikeM to Imran SardarGuest29th March 2007 at 14:54 #28906soniaGuest
Hi, is there any way to test a call within GW, like Debug test o xxx for dialtone.i have AX24.6th April 2007 at 18:32 #28907monzurGuest
I have a TenorAS box, I have DID from voxbone. How I can establish communicaton with PSTN phone. I have mapped voxbone DID with sip server, but could not communicate.7th April 2007 at 02:12 #28908HareezGuest
Hi, I have got AXT-800 pls help me how to make test call thru quintum AXT 800 and also how to detect port dial tone. thanx