- This topic has 108 replies, 1 voice, and was last updated 13 years, 5 months ago by MikeM to emnuu.
21st July 2005 at 14:19 #28834VeenaGuest
I am new to configuring quintums. Please help
1. Firstly I am not getting caller ID on my phones. We have asked for caller id service from our service provider yet I do not see the ID. If I do event log I see the originating caller id but it does not pass it to the PBX. PLease let me know if I have to do any configuration on the quintum
2. If I put the # sign after dialing any local or long distance call it works. But if I put # sign after dialing the digits to international calls it does not work. Does anyone know why coz it is killing me
Any help is appreciated22nd July 2005 at 14:22 #28835MikeMGuest
It is always helpful to provide the model type of Quintum that you have as there are differences between the A400/A800 and the 2nd generation AS/AX.
1. There is a setting in the trunk groups for caller id. You have to make sure this is enabled to pass the id through.
2. What do you mean it does not work? Does the call not go through?
Mike22nd July 2005 at 18:52 #28836VeenaGuest
Thank you for your reply.
1. It is an 1G D2400 quintum
2. All incoming calls are working but they come in as “Trunk 775”
3. In the quintum I have did this on the pstn trunk group
ame = pstnpassthrough1
Pass Through = yes(1)
PT Trunk ID = 0
Provide Call Progress Tone = yes(1)
Busyout = no(0)
Hunt Algorithm = ascending-round-robin(2)
Overlap Dial = no(0)
Modem Calls = No(0)
Direction = both(2)
DN Used = public
End Of Dial = yes(1)
End Of Dial Digit = #
Add End of Dial Digit = yes(1)
Ivr Type = None
CID = Trunk ID(1)
External Routing Request = no(0)
Auto Switch Enable = no(0)
Forced IP Routing # = none
Trunk ID(Account Code) = none
Trunk ID Delivery = as origination number
2 Stage Dial = No
Translate Inbound Caller ID = no(0)
Relay Caller ID = yes(1)
IP Extension = no(0)
Maximum LAM Calls Allowed = 24
Let me know if its wrong..or if there is any other place to enable caller-ID
Thank you for your help23rd July 2005 at 15:37 #28837ngozi braideGuest
how do i make a call using FXO PORT?
GIVE ME A STEP BY STEP INFORMATION AND CONFIGURATION23rd July 2005 at 19:47 #28838MikeMGuest
That is a very demanding message.
If you would like a step-by-step configuration, I will be happy to provide this to you for a fee. If you would like to know more information on my fees and services please email me at firstname.lastname@example.org and put Quintum in the subject line so that I am notified of the new mail.
Mike27th July 2005 at 11:27 #28839mayeen uddinGuest
Please somebody help me ” Password breaking of quintum axt2400 gateway”?28th July 2005 at 16:30 #28840MattGuest
Call quintum, tell them you need them to reset your password31st July 2005 at 18:24 #28841MohideenGuest
How to set IP for Tenor Asg400?
PB: typing only working on Login field but not working in Password field.
I tried with Hyper Terminal and some other Emulation Softs all giving same pb?22nd August 2005 at 08:32 #28842kobeGuest
would like to seek advice on the configuration on Tenor DX2030, 2nd generation. The setup is as below
Analog ext pabx Tenor VOIP system destination number
would like to seek guidance on how to configure the Tenor to route “callerid and callee id” to the VOIP system and back, knowing that Alcatel pabx is connected to the quintum through a E1 Pri Card.
That is to ensure destination will know who is calling and ensuring too the destination will know how to call back to the calling party.
p/s i’ll be using a tenor configuration manager tooo
kobe5th March 2006 at 23:04 #28843MoscowGuest
I have forget my quintum DX2030 password . please tell me how to break password or reset all the gateway10th March 2006 at 16:32 #28844KalGuest
Hi, I need help configuring a Quintum DX4096. It is connected to a T1 (CAS) which is coming form a PBX. We want to route the calls to a SIP User Agent but I do not know how to configure the extensions (2301) to the channels on the gateway and then have a channel forwarded to the proper SIP User Agent. This is my first Quintum Configuration, please help.
Kal1st April 2006 at 14:34 #28845moryGuest
we have tenor ax. when some customer connct to tenor within pstn network they hear “please enter pin code” again and again and ther is no progress. but most of user can call throgth this tenor
anybody to help?1st April 2006 at 14:48 #28846Mikem to MoryGuest
If all the other users are coming to the tenor from PSTN, then it sounds like you may be using authentication using caller id and maybe this one user is not sending caller id.
Check this. If it is not this, then you can contact me at email@example.com to discuss the problem further.5th April 2006 at 08:50 #28847tamerGuest
ihave atenor ASM200 and ineed admin guide to show me how to to configure it
thanks alot.22nd April 2006 at 10:02 #28848PratikGuest
I have configure TENOR ax. and it works fine.
Can anyone help me to configure the same toner for calling outside ?
Using the destination toner, is it possible to connect other lines.