Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Tenor A400 and h323-remote-address

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 10th January 2005 at 08:02 #28698
    Wills
    Guest

    Configured radius of A400 for prepaid calling as below:

    ——————-
    config radius user# print
    print

    host p 192.168.10.198
    authenticationport p 1812
    accountingport p 1813

    host s 0.0.0.0
    authenticationport s 1812
    accountingport s 1813

    retry = 3
    timeout = 5
    accountingtype = 2
    sharedsecret ********
    ——————————

    But i am not getting
    tenor-h323-remote-address in radius server. Can any one help me.

    10th January 2005 at 12:22 #28699
    Noname
    Guest

    Nothing wrong with your configuration ,as long as you have the gateway and the billing on the same data subnet.
    If the gateway is on I.P. 192.168.10.xxx, you are ready on the Quintum.
    Try pinging the billing or radius server from the Quintum gateway.
    Or enable the log of the Quintum to see the messages from/to radius.

    Quintum# ev +rad to enable log
    Quintum# ev -rad to disable log
    Quintum# ev to display the log

    Good luck!!!!

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.