We have DX2030 and we want to use 2 types of IVR
( let say 15 channels for Calling card and 15 Channels for ANI )
We are using ISDN PRI
(the problem is I only can use 1 TrunkCircuitRoutingGroup and if I add anther one i can not see it in the DigitalInterface )
I tried, but no luck.
What I did was put a small PABX on the front, run the E1 into the PABX and use it to split the main E1 into two streams, one using PRI to get ANI, and a second one using CAS.
I did fed the PRI into port one(PSTN), and the second one into the PBX side.
If anyone knows how to do it in a simpler way (san PABX),please post.
if you were able to do this in the old D3000, then you were lucky as it is not a supported configuration for any of the Digital Tenors. Unfortunately, if you set the trunk as ISDN, then it cannot be split in to another group and work reliably.