Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Wat is LDN (Public & Private) in A800?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #28476
    DK
    Guest

    Hi,

    Is there anyone who can explain what exactly the LDNs are? private and public that are in PBX and PSTN groups?

    tnx in advance

    #28477
    Mike
    Guest

    DK,

    LDN stands for Local Directory Number. An LDN can only be attached to the LCRG (on AS/AX/DX units) or in the PBX trunk group of older A400/A800. Quite simply, they are the phone numbers that people call to the unit. For example, if you had a phone connected to the FXS/PBX ports of an A800 or AS/AX unit and you wanted to assign it a phone number of 5551000 so that anytime someone called 5551000 and it came in to the Tenor it would ring the phone, you would configure 5551000 as the LDN for the trunk group where the phone is connected.

    For PSTN trunk groups, you would use hop-offs (HND) also called LAMs that allow you to strip and add digits.

    As for public and private, that could get very confusing. There are many documents that try to explain this concept and many people may offer their opinions on this, but quite simply a public number is a phone number that can be routed over the “real” phone network. It must follow a specific format/number of digits. A private number is one that has no format and is made up by the users. A private number cannot be routed by the public phone network. An example of public and private numbers is if you are in an office with a PBX. You have public phone numbers where your customers and others can call from outside your company to you. Yet you may be able to dial a 4 digit extension to call the person in the next office over from you. The 4 digit extension dial is a form of private dialing.

    #28478
    Marlan
    Guest

    Dear,
    can anyone help me to setup y quintum A800 to send call over IP using a pstn line????
    I have just configure it to receive call and foward it to pstn line ( call ternination). now i need some one to call the pstn line connected on quintum pstn port, and be and be able to send the destination number in international format without IVR. if the tenor can mark a pause for a few second so that the calling party enter the destination number or send it when dialing the number connected on the uintum at same time immedatly. exple: pstn nuber on the quintum: 1234567
    destination number to call in international format: 890123456 without international prefix
    1st: dial at sae time 123456789123456 or dial 1234567 and wait a few second then dail again 890123456

    Best regard at the communauty
    Marlan

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.