Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Quintum D2400 with DID line

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #28396
    Lai
    Guest

    Hi all,

    I have a T1 line with 300 DID numbers (0800-1099) will come in from PSTN.
    I want to ask how to setup the Quintum to support the DID. For example when
    i dial 0800 from PSTN to tenor, the voice will go to voice gateway A. if i
    dial 0900, then the voice will go to voice gateway B.
    and anyone have sample config about that?

    Many Thanks!!!

    Lai

    #28397
    Noname
    Guest

    A small PBX will do the trick,but not the Quintum , as far as I know.

    #28398
    Teodor Georgiev
    Guest

    Hi Lai,

    that is possible. We have such configurations, where a customer who diales some DNIS (access number) gets routed to a TSP Voiceware or Digitalk system where he hears an IVR.
    Shortly – what do you want is possible.
    Contact at teodor at voicelink.biz if you wanna us do the config for you.

    #28399
    Lai,Teodor
    Guest

    Thinking it over, I got an idea:

    T1 comes in via the PSTN port. Some of the DID numbers are connected on the first box, where they get one type of prompt.

    The other DID numbers are set into the “bypass” table,sent to the other T1 port that normally goes to the PBX.
    But instead of going to the PBX, send them with a crosover cable to the second gateway,where they get the other type of prompt.

    Only a theory, never done it, but I may work

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.