- This topic has 3 replies, 1 voice, and was last updated 5 years, 7 months ago by hemza.
3rd November 2004 at 01:07 #28371FractalGuest
I have a P4 unit and a G4 unit (Ericsson Webswitch 100) configured via the windows utility and have all the passwords and stuff for the box via telnet. Currently, from any line (FXS or FXO) you need to dial an extension number of the phone you want to connect to. You just get a dialtone when dialing into the G4 via POTS. How do I setup these 2 boxes to automatically dial the corresponsing extensions (1-5, 2-6, etc.) on ring/offhook. I don’t care that 2 remote phones can’t call eah other directly, just want to extend 4 PBX lines to a remote location transparently. Any help would be appreciated.
Dan G4th November 2004 at 19:28 #28372GaryGuest
That is not too hard to do, I have done that before, I’ll look through my notes and check and see how I did it..
I do believe on the P4 you just set the unit to “hotline” to the extension number of each G4 line. Let me know if you get it figured out, of I can help some more later,
Gary.11th November 2004 at 05:28 #28373Fractal (Dan Gauthier)Guest
Yes, the two tricks I needed to know are: 1) extension numbers must be unique as when you place a call to a number via the translate tables of extension to IP, there is no extension number in the destination. It only uses the extension you dial, so all boxes that could ever talk to each other must have unique extensions. 2nd, the term “hotline” in the setup program refers to what I would have called “autodial” and is set on a pop-up window on a button labeled “HOTLINE”. It is possible to set up this configuration of direct connections between two boxes using only the windows setup program.
Thanks anyway, Gary. I figured it out via the “F1” help file in the windows app. I think that’s a first (a windows help file being useful).
I AM rather impressed by the G.729ab compression, the quality loss vs. 711 is barely noticeable except in music on hold and even then I’d call it twice as good as a cell phone.
Dan18th June 2014 at 18:25 #28374hemzaGuest
i want to know about configuration ericsson webswitch 100