Call from quintum A800 to Cisco 5350 This topic has 1 reply, 1 voice, and was last updated 19 years, 6 months ago by Noname. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 15th October 2004 at 20:38 #28251 PeterGuest I have done all the configuration but I am getting a busy dial!!!Calls are ending on the CISCO 5350, is there anything special that I need to be aware of. All calls are coming from via PBX of the Quintum. Thanks Peter 16th October 2004 at 06:19 #28252 NonameGuest Check the basics three times: 1) Codecs 2) Static routes outgoing from the quintum 3) Dial peer pots coming into the Cisco. 4)Prefix on the route. Enable the call log on the A800. Do ev +ch Clear the log ( ev c) Make a call Pull the log ( ev ) Post the result or email to mike3799@yahoo. I will take a look. Best luck!!!!! Author Posts Viewing 2 posts - 1 through 2 (of 2 total) The forum ‘Voice over IP’ is closed to new topics and replies.