Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

how Winradius billing work with Quintum

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #28233
    mario
    Guest

    hello, everyone

    i wanna know how How to configure quintum A800 to work with Winradius voip billing?

    any setting examples?

    mario

    #28234
    Jeff
    Guest

    check this http://www.mutualphone.com/winradius.htm

    If your NAS is QUINTUM VoIP. Please check “Use Access-Accept as Account-Request start record” at “settings/Authentication…/VoIP”.

    #28235
    Nikola
    Guest

    Hi Jeff,
    I am now preparing to activate WinRadius, so pelase tell me:
    1.Which TFTP/FTP Server are you using
    2. Can Winradius and Quintum support all versions : Post Paid, Pre- paid,Prepaid Card

    I made all setup as it was instructed but my Tenor does not giving any voice prompt.

    Thanks and regards
    Nikola

    #28236
    Jeff
    Guest

    1.Which TFTP/FTP Server are you using
    ——–we do pc2phone and device2phone, no phone2phone. so dont use TFTP

    2. Can Winradius and Quintum support all versions : Post Paid, Pre- paid,Prepaid Card———-yes, prepaid and postpaid

    #28237
    Nikola
    Guest

    Hi Jeff,
    I have problem that IVR is not working, so I am opinion that I have problem with TFTP and I cannot reach IVR prompt.

    Nikola

    #28238
    Francesco
    Guest

    Hi guys,
    i wanna know how How to configure
    Winradius to do an username/password access for WLAN(802.11)with a Cisco Aironet Access point 1200 series.
    any setting examples?
    Thnaks

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.