I have successfully setup a gatekeeper for my Ata’s Network. I can call to/from any ata to other without problem.
But, I need to have some ATA’S
behind Linksys, and when this happens… the ATA can’t find the address of the gatekeeper for register.. so i Have no dial-tone, no nothing… I tried setting-up the NAT IP of the linksys , but that didn’t work, also i open some ports (the media ports and others) but it’s still not working.
Make sure your linksys have the dhcp deactivated and route the port 1720 to the ATA that you are using. Maybe, the ata is not having a response from the gatekeeper. Also check on the gatekeeper if the ata is registered on it. Good luck. Luis.
Author
Posts
Viewing 3 posts - 1 through 3 (of 3 total)
The forum ‘Voice over IP’ is closed to new topics and replies.