Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

VOIP Where to start

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #27528
    pjascol
    Guest

    Hi
    Can anyone tell me where I can find information on how to get my application to transmit speech and data (57600 baud ) across an ADSL connection. Is there a chipset that can be ‘bolted’ on to my existing application to allow this connection to occur,
    Or is it much more complex to achieve

    Cheers
    Peter

    #27529
    Telcom Products
    Guest

    57,000 baud will be near impossible to achieve. You’ll be able to get your normal 14.4 fax’s to go with no problem though.

    #27530
    GKM
    Guest

    ADSL supports much higher baud rates.
    1. Solution 1 SW
    Depending up on the

    -system you are using and
    -the applications that are invoked one can estimate the unused system resources and can add additional software to do this. If this is not possible you go for Hardware Solution given blow

    2. Solution 2 HW

    If the resources are not adequate than you can use hardware solution.

    3. To proceed further more info is required.

    GKM

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.