Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

MAX 6000 Handling Incoming Calls

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #27195
    Gulzar Hussain
    Guest

    Max 6000 rejects incoming call after receiving ACF from Gatekeeper (GNUGK)

    entering _handleVA(): non standard len is -1

    > 1282.08: H323: h323InNewCall(7): Incoming WAN call
    1282.08: H323: -1: change state from IDLE –> to IDLE
    1282.08: H323: 6: _allocH323Call: inuse count = 1
    1282.08: H323: 6: dispatch msgType WAN_NEWCALL in state IDLE
    1282.08: H323: 6: _wanNewCall: SSD DNIS collected = 9974
    1282.08: H323: 6: _wanNewCallRepeat()
    1282.08: H323: 6: _goToVoipSetupMode()
    1282.08: H323: 6: _goToVoipSetupMode: codec: 0
    1282.08: H323: 6: change state from IDLE –> to WAN_IN
    1282.08: H323: 6: _lanMakeCall: CLID collected = 215838220
    1282.08: H323: 6: _lanMakeCall: Tel. # = #9974, stackID = 0
    1282.08: H323: 6: change state from WAN_IN –> to WAN_ORIG
    1282.08: New VOIP session name = V:eac99de3-b5cd-11d8-9e41-00c07
    1282.15: H323: 6: Received Admission Confirm
    1282.15: H323: 6: entering _handleVA(): call->state=WAN_ORIG, defaultMsg=(nul
    l pointer)
    1282.15: H323: 6: entering _handleVA(): non standard len is -1
    1282.15: H323: 6: stackH225Event: H323_LAN_INITIATED
    1282.20: H323: 6: stackH225Event: H.225 Idle release code = 267
    1282.20: H323: 6: stackH225Event: H323_LAN_DISCONNECTED
    1282.20: H323: 6: dispatch msgType LAN_DISCONNECTED in state WAN_ORIG
    1282.20: H323: 6: _lanCallDisconnected()
    1282.20: H323: 6: _toneOff()
    1282.20: H323: 6: _lanCallDisconnected() dropReasonWhy: 269
    fegwCauseCode: 267
    1282.20: H323: 6: _goPlayCallFailurePrompt()
    1282.20: H323: 6: _goToBusyState( 7), dropFrom 4 dropReasonWhy=269 fegw=267
    1282.20: H323: 6: _goToVoipSetupMode()
    1282.20: H323: 6: _toneOn(6)
    1282.20: H323: 6: change state from WAN_ORIG –> to CALL_BUSY

    #27196
    mfrater
    Guest

    I am getting the same thing.. something appears to be happening at the H.225 stage.
    ie.
    stackH225Event: H.225 Idle release code = 267

    Did you ever find an answer to this?

    #27197
    Gulzar Hussain
    Guest

    no not till yet
    i throw my max 6000 to the dust bin 🙂

    #27198
    Teodor Georgiev
    Guest

    Hi,

    Lucent are very good dial-up access servers, but unfortunately their VoIP support is raw and sort of proprietary. Sometimes you might hit interopability problems 🙁

    A detailed H323 debug will bring more light to the issue

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.