- This topic has 45 replies, 1 voice, and was last updated 14 years ago by MikeM to Fareed.
2nd May 2004 at 17:42 #27058olagokeGuest
i am trying to recover the password of my Quintum tenor A800. any body out there kno whow ?2nd May 2004 at 22:35 #27059razvanGuest
it depends on the firmware version u have on it.
some older version have a snmp exploit that would do this but the newer version seemed to have fixed this problem.3rd May 2004 at 00:08 #27060olagokeGuest
I have system software version P4-2-20-31 (lec)
Boot software version :P4-1-3
Database version: 2.80 09-13-2000
thnaks3rd May 2004 at 05:14 #27061Breaking Quintum PasswordGuest
If you have console password to the equipment is really easy, contact me at firstname.lastname@example.org so I can explain you the procedure.
Regards,7th May 2004 at 05:16 #27062Saul BejaranoGuest
I ment Console access.
You have to be connected to the serial console port to be able to break the password.
Do you have console access thru the serial interface?13th May 2004 at 13:44 #27063sohailGuest
can any body help how to recover quintum password , i have Quintum 3200 also if some body can help from where i can get quintum 3200
sohail14th May 2004 at 17:13 #27064olagokeGuest
sohail i can help i was able to recover mine sys. after a few pains. but you don`t have to go through that.contact me at email@example.com August 2005 at 16:32 #27065Quadri, Syed ZaigumGuest
Here is the Situation:
We initially configured our Quintum CMS at office and then we brought it here in Tele-House Frankfurt after fixing it in closet we tried to Telnet , Ping and connect using GUI Config Manager but nothing worked then I tried to connect through Console cable from PC lying here but that PC has LINUX OS and in linux there is one application known as minicom through which u can connect the Serial Communication port of PC. I tried to connect but everytime it used to get connected but show strange messages like “Database intializing” then I brought a Window PC nad connected it through Hyperterminal then it showed the login screen. I tried with the password but failed but in the office I had accessed the system many time with the same password then I tried with the old password it also failed then reset the device but again it showed me those messages at the Terminal of Hyperterminal like Initializing passwords and so on but this time it gave me the option to restore the previously known configuration and I accepted it and during reviving that config, system gave many errors after that I am not even able to get anything on the Hyperterminal screen. No ACTIVITY at all on hyperterminal further I saw a Reset button on system controller card I pressed it but no use then I tried anothrt RESET button provided at the
bottom on the front panel but it seems to be not in a good position when I press it the whole panel get pushed behind from inside and I can not press it properly.
Then after all that we start observing the login prompt like this [fed2f60a] Login:
So I tried the login and passwd but cannot get access to the system. At the moment we r standing here:
but cannot get access to the CMS on trying passwords.
We need immediate help on this issue.
Looking forward to hear from u soon.
Quadri, Syed Zaigum
Fax: 069-240067505th August 2005 at 22:42 #27066SugestionGuest
You may have erased the password already.
Try to login without a password.
Just press enter when it ask you for a password.
Best luck27th August 2005 at 19:44 #27067Hi AllGuest
Buzz me for any problem of any series quintum.
ProSys29th August 2005 at 14:40 #27068MerlinGuest
I got same problem and i write to quintum ,
for free, u just have to provide the P/N and serial Unmber of the unit and put it only with public ip or port forward on it if u r NAT user1st September 2005 at 02:08 #27069jhadGuest
i am trying to recover the password of my Quintum tenor A800. do any body knows how?1st September 2005 at 02:29 #27070jhadGuest
i am trying to recover the password of my Quintum tenor A800. do any body knows how?1st September 2005 at 03:41 #27071WIlson BoyrieGuest
Connect a computer via the RS232 port to the gateway.
Setup to 38400 bps,8 bits,1 stop bit,no parity.
Confirm that you get the propmt when you hit “enter”several times.
Without removing the cable,reboot the gateway.
When you see a message that says “hit enter withing three seconds to enter configuration”, do so.
You will be able to reset the equipment back to factory default.
WARNING!!!!!!!!!!!!! You will loose all your configuration, the only thing left will be the I.P. address information.
You will need to know how to configure your gateway again, from scratch!!!!!!!!!!!!!!!
Wilson Boyrie21st February 2006 at 05:15 #27072ZakiGuest
I forgot my Quintum AXT800 password. I can not loged in. Please help me, how can I brack the password. Please.