Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Tenor

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #27013
    Linman
    Guest

    I have successfully configured TENOR A800 PSTN ports for “Prepaid calling card”. Is there any way to know who is dilaing to which Telco number connected to TENOR.

    #27014
    Noname
    Guest

    Not unless you are talking about a digital system with a PRI link.

    If that is the case you could have that information aout of the CDR s’ or your billing system.

    It may work also if you have a T1 non-pri with DTMF caller ID (not very common, only on the US).

    On analog, you could still get the port number out of the CDR ‘s, but the caller ID needs to be “fished out ” by the billing system.

    #27015
    razvan
    Guest

    there is one solution
    configure 8 different pstn tg for each line and configure the forced ip routing with the number assigned to that line and send it like this out.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.