Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Webswitch 100 G4 – FXS and FXO

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #26768
    Moin
    Guest

    Hi All,

    I have got a webswitch 100 G4 , 4 port FXO device , I wanted to talk to my webswtich 100 P4 which is an FXS device in Lahore.

    My question is can I use G4 2 ports as FXS and 2 as FXO.

    Don’t mind my ignorance as I am new to VOIP.

    Cheers.

    #26769
    gary
    Guest

    no.. the ports are not programmable. If you plug a phone into the port of the G4 nothing will happen. If you plug a phone line into the port on a P4 it will blow up that channel. You need an FXS at the second location to talk to the FXS at the first one.

    #26770
    Moin
    Guest

    Hi Gary,

    I understand that P4 and G4 ports are not programmable but what does this mean

    “You need an FXS at the second location to talk to the FXS at the first one.”

    I have P4 in remote client , I have a G4 and P4 in my house. How should I connect these so I can use fxo of G4 to call home and then call destination , at the same time when at home call using phone P4.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.